Awning Motor 3T45-50/12V + Solar Module SP24 + HSZ1
With mechanical limit
50 Nm / 100 kg pulling force
Suitable for folding arm awnings with up to 8 meters of projection using 2 arms
Includes Solar Module SP24 and external battery SP24EA with radio receiver (bidirectional)
Includes Remote Control HSZ1 1-channel
Includes adapter kit for the following awning round tubes (= outer diameter of tube):
- 63 mm round groove tube
- 70 mm round groove tube
- 78 mm round groove tube
- 85 mm round groove tube
Awning Motor 3T45-50/12V
Benefits of the motor at a glance:
- professional retail quality
- powered by solar module, no power connection required
- waterproof plug connection for easy connection to solar module
- super quiet gear, completely maintenance-free
- thermal overload protection
- fast 12 rotations per minute
- fasy installation
- extensive and understandable installation instructions
- suitable for both right and left installation
- electromagnetic disc brake
- 5-year warranty
| Technical data: |
| Type: |
3T45-50/12V |
| Torque / Nm: |
50 |
| Tension Force / kg: |
100 |
| Power / W: |
142 |
| Speed / RPM: |
12 |
| Operating voltage / DC: |
12 V |
| Limit switch capacity / max. rotations: |
22 |
| Motor total length / mm: |
661 |
| Installation length / mm: |
637 |
| Cable length / m: |
2.5 |
| Protection class: |
IP44 |
Solar Module SP24 + Battery SP24EA
Benefits of the solar module at a glance:
- suitable for 12V tubular motors up to 50 Nm torque
- external battery, power supply even in poor weather and darkness
- battery SP24EA with integrated radio receiver (bidirectional)
- includes extension cable 3 m / battery can be installed separately from the solar module
- no wiring required for control elements
- up to 10 transmitters of the 3T radio series can be stored
- low standby power consumption (≤ 40 μA)
- battery charging via solar radiation or optional 12V mains plug
- two mounting options: solar module can be mounted on the battery using brackets / battery can be mounted separately from the solar module
- easy programming
- 2-year warranty
| Technical data: |
| Type: |
SP24 |
| Operating voltage / DC: |
16 V |
| Operating current: |
307 mA |
| Short-circuit current (Isc): |
333 mA |
| Power: |
4 - 9 W |
| Storage temperature range: |
-10 °C to +45 °C |
| Operating temperature range: |
0 °C to +50 °C |
| Dimensions (LxWxH) / mm: |
555x60x10 mm |
| Compatibility: |
Compatible with battery SP24EA |
| Technical data: |
| Type: |
SP24EA |
| Operating voltage / DC: |
9.5 – 12.6 V |
| Frequency: |
433.05 – 434.79 MHz |
| Battery capacity: |
5200 mAh |
| Operating temperature range: |
-15°C to +55°C |
| Range: |
Approximately 40 meters outdoors |
| Dimensions (LxWxH): |
595x28x28 mm |
Radio Remote Control 1-Channel HSZ1
- 1-channel control
- transmitter can be paired with a motor/receiver or with multiple motors/receivers, creating a group.
- compatible with all 3T radio tubular motors and 3T radio receivers
- compatible with uni- and bidirectional radio receivers
- operating mode (uni- and bidirectional mode) adjustable via DIP-switch
- easy programming
- range approximately 30 m indoors, 200 m outdoors
- includes magnetic wall holder, battery, and instructions
| Technical data: |
| Type: |
HSZ1 |
| Input voltage: |
3 V |
| Frequency: |
433.05 – 434.79 MHz |
| Transmitter power: |
10 mW |
| Operating temperature range: |
-10°C to +50°C |
| Battery type: |
3 V / CR2450 (included) |
| Dimensions (LxWxH): |
130x45x11 mm |
What`s included:
- 1 pc. Motor 3T45-50/12V
- 1 pc. Adapter kit for round tube of choice
- 1 pc. Universal bracket
- 1 pc. Adjustment pin for limit position settings
- 1 pc. Remote control HSZ1
- 1 pc. Solar module SP24 + battery SP24EA
- 1 pc. Extension cable 3 m
- 2 pcs. Wall mount for battery
- 2 pcs. Wall mount for solar module
- 4 pcs. Screws for wall mount
- 4 pcs. Wall plugs
- Extensive and understandable installation instructions
WEEE Reg. No.: DE 77028333
Manufacturer/EU Responsible person
3T-Components GmbH & Co. KG
Grete-Schickedanz-Straße 5
55545 Bad Kreuznach
Germany
Phone: 0671 887 673 0
E-mail: info@3t-components.de
General safety instructions for tubular motor
Please read these important safety instructions before commissioning!
Incorrect installation can cause serious personal injury and damage to property.
Failure to observe this user information, including all instructions and provisions, will invalidate the warranty.
If these instructions are not followed, the manufacturer or supplier shall not be liable for any personal injury or damage to property
General safety instructions
Follow all instructions, as incorrect installation can lead to serious injury.
- WARNING: The drive must be disconnected from the power source during cleaning, maintenance and when replacing parts
Danger to life due to electric shock when working on electrical systems.
- The electrical connection, installation and commissioning of the motor may only be carried out by qualified specialist personnel.
Remove all unnecessary cables before installing the drive and deactivate all devices that are not required for operation with electricity.The relevant regulations and guidelines must be followed to prevent damage to persons and property.Observe the safety instructions in accordance with EN 60 335-2-97: The mains connection cable of the drives must be laid internally.Installation in accordance with DIN 18073: The shutter box cover must be easily accessible and removable.Installation and connection of switching devices may only be carried out in a de-energised state.Installation in accordance with EN 60335: Only switching devices with a minimum contact opening of 3 mm may be used, and the up and down directions must be interlocked.
- For installation in damp rooms, observe the regulations (VDE 0100, parts 701 and 702).
- Do not use defective devices: Never use defective devices.
Check the system regularly for imbalance and signs of wear or damage to cables and suspension springs. Do not use the system if repairs or improvements are necessary.
There is a risk of personal injury and damage to property due to electric shock or short circuit.
Keep the instructions for future reference.
Inappropriate use
- The movement of the roller shutter or awning must be monitored so as not to endanger persons
.
- Children must not play with the device. Do not allow children to play with the controls.
- Keep transmitters away from children. Store transmitters in such a way that unintentional operation is prevented (e.g. by children playing).
If the power cord of this appliance is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
Proper use
- Use tubular motors only to automate roller shutters or awnings
.
- Only use original components and original accessories from the manufacturer..
- The mains connection cable of the drives must be laid inside the conduit up to the junction box. The local electrical regulations must be observed..
- A 230 V / 50 Hz power connection with fuse must be available at the installation site for the electrical connection of the tubular motors, with the exception of our 12V tubular motors..
- Persons must be instructed in the correct operation of the tubular motor.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved..
- Inspect the installation frequently for imbalance and signs of wear or damage to cables and springs. Do not use if repairs or adjustments are required.
Safety instructions for radio controls
Please read these important safety instructions before commissioning!
Incorrect installation and operation can cause serious personal injury and damage to property.
Failure to comply with this user information and all instructions and provisions contained therein will invalidate the warranty.
If these instructions are not followed, the manufacturer or supplier shall not be liable for any personal injury or damage to property.
General safety instructions
Follow all instructions, as incorrect installation can lead to serious injury.
- Make sure to change the batteries of the radio transmitter regularly. Only use the batteries recommended by the manufacturer. Dispose of used batteries in an environmentally friendly manner.
Do not use any metal tools when inserting or removing the batteries to avoid short circuits. Ensure that the polarity of the batteries is correctly aligned as specified in the instructions.Place the radio control unit in a dry place that is protected from direct sunlight and moisture. Make sure that there are no metallic objects nearby that could block the radio signal.Always keep batteries and the radio controls out of the reach of children. Swallowed batteries can cause serious injury. If ingestion is suspected, seek medical assistance immediately.
Improper use
- Do not use old or damaged batteries. Dispose of defective batteries immediately in accordance with local regulations on battery disposal.
Keep radio controls away from children. Store radio controls in such a way that unintentional operation is prevented (e.g. by children playing).Children must not play with the device.If the radio control unit is damaged or defective (e.g. due to falling or moisture), it must no longer be used. Have it checked by qualified specialist personnel or replace it.
Proper use
- Make sure that radio controls are suitable for use with tubular motors and comply with the technical specifications.
Radio controls with a timer function must be programmed correctly to safely control the movements of the tubular motors and minimise the potential risk of injury.
- Persons must be instructed in the correct operation of the radio control system.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Check regularly that the radio control is working properly.
Disposal instructions
Separate collection of old appliances
Electrical and electronic appliances that have become waste are referred to as old appliances. Owners of old appliances must dispose of them separately from unsorted municipal waste. In particular, old appliances do not belong in household waste, but in special collection and return systems.
Possibilities for returning old appliances
Owners of old appliances from private households can hand them in at the collection points of the public waste disposal authorities or at the take-back centres set up by manufacturers or distributors in accordance with the ElektroG.
Meaning of the "crossed-out wheelie bin" symbol
The crossed-out wheelie bin symbol regularly displayed on electrical and electronic appliances indicates that the appliance in question must be collected separately from unsorted municipal waste at the end of its service life.
Battery instructions
Batteries can be returned to the point of sale free of charge after use.
The end user is legally obliged to return used batteries.
At the end of their service life, batteries and accumulators that are no longer usable must not be disposed of with household waste. This is indicated by the crossed-out wheelie bin symbol. The chemical symbols Hg (mercury), Cd (cadmium) or Pb (lead), which may appear below the symbol of the crossed-out wheelie bin, indicate the substances contained.
