Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Engine group control unit MSG04/AP

SKU: 321
GTIN: 4260336110682
HAN: MSG4/AP
Category: Central group controller
Manufacturers: 3T-Motors

for controlling up to 4 awning or roller shutter motors

112,90 €

incl. 19% VAT , plus

Available immediately
Delivery time: 0 Workdays (DE - int. shipments may differ)

Description
Product Safety

Motor group control unit MSG4/AP

4-fold central control unit for controlling up to 4 awning or roller shutter motors

Features and functions:

The MSG central control unit makes it easy and cost-effective to combine up to 4 230 VAC motors into one group with a high level of operating convenience.
Centralised operation: Is carried out by pressing an externally connected blind push-button or optionally via a blind timer with 230 V output. The supply voltage for the timer or group button can be taken either from the device or on site. The central command takes priority.

Do not use blind switches, as these can cause damage to the system and the motors!

any size group by looping on the central push-button
all motors are fused separately via a 2 AmT miniature fuse each
made in germany: our central controls are manufactured in-house and guarantee maximum operational reliability
the MSG central control unit is mounted in an IP55 surface-mounted plastic housing (190x160x85 mm)
available versions:
MSG4/AP for 4 motors in surface-mounted housing 190x160x85 mm
MSG6/AP for 6 motors in surface-mounted housing 240x195x85 mm
MSG10/AP for 10 motors in surface-mounted housing 240x195x85 mm
2 years warranty

Technical data:
Type:	MSG4/AP
Operating voltage:	230 VAC
Control voltage:	230 VAC
Switching contact load:	max. 2 A, max. 750 VA motor load, only for 230 V motors with limit switches
Operating temperature range:	0°C to +60°C
Fuse protection timer:	100 mA
Operating voltage / VAC:	230
Motor fuse protection:	2.0 AmT
Protection class:	IP55
Dimensions (LxWxH):	190x160x85 mm

Product video:

WEEE-Reg. No.: DE 77028333

Item information	Value
Shipping weight:	0,71 kg
Item weight:	0,71 kg

Manufacturer/EU Responsible person

3T-Components GmbH & Co. KG
Grete-Schickedanz-Straße 5
55545 Bad Kreuznach
Germany

Phone: 0671 887 673 0
E-mail: info@3t-components.de

General safety instructions

Please read these important safety instructions before commissioning! Incorrect installation can cause serious personal injury and damage to property. Failure to comply with this user information and all instructions and provisions contained herein will invalidate the warranty. If these instructions are not followed, the manufacturer or supplier shall not be liable for any personal injury or damage to property

General safety instructions

Follow all instructions, as incorrect installation can lead to serious injury.

WARNING: The drive must be disconnected from the power source during cleaning, maintenance and when replacing parts
The electrical connection, installation and commissioning of the motor may only be carried out by qualified specialist personnel.
The relevant regulations and guidelines must be followed at all times to prevent damage to persons and property
Assembly and connection of switching devices may only be carried out in a de-energised state
The electrical installation must be carried out in accordance with VDE 0100 or the legal regulations and standards of the respective country by an authorised electrician. This person must observe the enclosed installation instructions for the electrical devices supplied.
Keep the instructions for future reference.

Inappropriate use

Do not allow children to play with the motor controls
Do not use blind switches, these can cause damage to the system and the motors!
If the power cord of this appliance is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Proper use

Use the motor group controller only to automate roller shutters or awnings
The mains connection cable of the drives must be laid inside the empty conduit up to the junction box. The local electrical regulations must be observed
A 230V/50 Hz power connection with fuse must be available at the installation site for the electrical connection of the motor group control unit
Persons must be instructed in the correct operation of the motor group control unit
The roller shutter movement must be monitored so as not to endanger persons

Disposal instructions

Separate collection of old appliances
Electrical and electronic appliances that have become waste are referred to as old appliances. Owners of old appliances must dispose of them separately from unsorted municipal waste. In particular, old appliances do not belong in household waste, but in special collection and return systems.

Possibilities for returning old appliances
Owners of old appliances from private households can hand them in at the collection points of the public waste disposal organisations or at the take-back points set up by manufacturers or distributors in accordance with the ElektroG.

Meaning of the "crossed-out wheelie bin" symbol
The crossed-out wheelie bin symbol regularly displayed on electrical and electronic appliances indicates that the appliance in question must be collected separately from unsorted municipal waste at the end of its service life.