Radio roller shutter motor with electronic limit 3T35-10RB 10Nm SW40

Radio roller shutter motor with electronic limit 3T35-10RB 10Nm SW40

SKU: 440
GTIN: 4260601764060
Category: 3T-Motors roller shutter motors
Manufacturers: 3T-Motors

With electronic limit & integrated radio receiver
10 Nm / 25 kg pulling force / up to max. 5.25 m² PVC roller shutter

67,90 €

incl. 19% VAT , plus

Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Description
Product Safety

Radio roller shutter motor 3T35-10RB

With electronic limit & integrated radio receiver
10 Nm / 25 kg pulling force / SW40 (for 40 mm 8-sided shafts)

The advantages of the motor at a glance:

professional specialist trade quality
Particularly suitable for thermally insulated roller shutter boxes with cramped installation conditions
radio receiver integrated in the motor head
electronic limit, easy setting of the end points via radio hand transmitter
intermediate position programmable
only 230V AC supply line for the motor, otherwise no wiring necessary
single and group switching of any number of radio drives
can be expanded and extended at any time using a 1 to 15-channel hand-held transmitter and timer
smart home capable with the everhome.de app (everHome Cloudbox required, further information on the everHome website)
a rocker switch for manual control can also be connected via the motor's connection cable
super quiet gear
electromagnetic disc brake
thermal overload protection
fast 17 rotations per minute
completely maintenance-free
easy installation
right and left installation possible
5 year guarantee

Technical data:
Type:	3T35- 10RB
Torque / Nm:	10
Tension force / kg:	25
Max. PVC roller shutter size / m²:	5.25
Max. Aluminum roller shutter size / m²:	4.2
Power / W:	144
Standby consumption / W:	4
Speed / rpm:	17
Operating voltage / V AC:	230
Limit switch capacity / max. revolutions:	30
Total engine length / mm:	584
Installation length / mm:	568
Cable length / m:	3
Frequency / MHz:	433.92
Protection class:	IP44

Installation instructions for mini motors SW40:

For mini tubular motors, we recommend using special mini suspension springs for motor operation, which only protrude approx. 1 mm into the roller shutter shaft.
This allows the shaft to rotate freely and prevents damage to the motor.

For steel shafts with a wrench size of 40 mm (SW40), only shafts with an external fold should be used.
Steel shafts with an internal fold will damage and destroy the motor.

The appropriate suspension springs SW40 for motor operation and roller shafts SW40 can be found here:

You can find the right rocker switch here: