Our bidirectional motors of the RX and RBX series are only compatible with the bidirectional transmitters from 3T-Motors (X Series and Z Series)
Here you will find the suitable bidirectional radio transmitters
Radio roller shutter motor 3T35-10RBX
With electronic limit & integrated radio receiver (bidirectional)
10 Nm / 25 kg pulling force / SW40 (for 40 mm 8-sided shafts)
Benefits of the motor at a glance:
- professional trade quality
- especially suitable for thermally insulated roller shutter boxes with limited installation conditions
- integrated bidirectional radio receiver in the motor head
- electronic limit switches, easy setting of end positions via radio remote control
- programmable intermediate position
- only 230V AC power supply required for the motor, no additional wiring needed
- individual and group control of any number of radio drives
- expandable at any time using 1 to 15-channel remote controls and timers
- smart-home compatible with the 3T WiFi-Bridge or 3T WiFi Mini-Bridge
- smart-home compatible with the app from everhome.de (everHome Cloudbox 4.0 required, further information on the everHome website)
- a rocker switch can be connected to the motor's connection line for manual control
- super quiet gearbox
- electromagnetic disc brake
- thermal overload protection
- fast 17 rotations per minute
- completely maintenance-free
- easy installation
- suitable for both right and left installation
- 5 years warranty
| Technical data: |
| Type: |
3T35-10RBX |
| Torque / Nm: |
10 |
| Tension force / kg: |
25 |
| Max. PVC roller shutter size / m²: |
5.25 |
| Max. aluminum roller shutter size / m²: |
4.2 |
| Power / W: |
144 |
| Standby consumption / W: |
2 |
| Speed / RPM: |
17 |
| Operating voltage / V AC: |
230 |
| Limit switch capacity / max. rotations: |
22 |
| Motor total length / mm: |
582 |
| Installation length / mm: |
567 |
| Cable length / m: |
3 |
| Frequency / MHz: |
433.05 – 434.79 MHz |
| Protection class: |
IP44 |
Installation note for mini motors SW40:
We recommend using special mini suspension springs for motor operation with mini motors, which only protrude about 1 mm into the roller shutter shaft.
This allows the shaft to rotate freely and prevents damage to the motor.
For steel shafts with a key size of 40 mm (SW40), only shafts with an external flange should be used.
Steel shafts with an internal flange will lead to damage and destruction of the motor.
The suitable suspension springs SW40 for motor operation and roller shutter shafts SW40 can be found here:
The suitable rocker switch can be found here:
What does bidirectional mean?
Bidirectional means that communication works in both directions. For roller shutter motors, this means that they not only receive commands but also send feedback. So, when you open or close a roller shutter, you immediately get the information on your smartphone about what actually happened. This way, you always know whether the roller shutter is open, closed, or partially open. Additionally, you can also control your roller shutters via smartphone.
Our bidirectional motors of the RX and RBX series are only compatible with:
- the bidirectional transmitters from 3T-Motors (X Series and Z Series) or ...
- the Connector app in connection with the Wifi-Bridge / Mini-Bridge from 3T-Motors (currently not available) or ...
- the Everhome app in connection with the Cloudbox from everHome (further information can be found on the everHome website)
What's included:
- 1 piece of radio roller shutter motor 3T35-10RBX
- 1 piece of adapter set SW40 (for 40 mm 8-sided shafts)
- 1 piece of clip bracket
- 1 piece of universal bracket
- 2 pieces of ferrule
- Complete and easy-to-understand installation manual
WEEE-Reg.-No.: DE 77028333
