Roller shutter motor with obstacle detection 3T45-30BE 30Nm SW60

Roller shutter motor with obstacle detection 3T45-30BE 30Nm SW60

SKU: 682
GTIN: 4260601768273
Category: 3T-Motors roller shutter motors
Manufacturers: 3T-Motors

With electronic limit & obstacle detection
30 Nm / 60 kg pulling force / Up to max. 9 m² PVC roller shutter size

80,50 €

incl. 19% VAT , plus

Old price: 115,00 €

Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Description
Product Safety

Roller shutter motor 3T45-30BE

With electronic limit & obstacle detection
30 Nm / 60 kg pulling force / SW60 (for 60 mm octagonal shafts)

The electronic 3T-Motors tubular motor for roller shutter elements offers fully automatic adjustment (Plug&Play) of the end points via the ESK adjustment cable or manual end point adjustment via the P1 button.
If the roller shutter hits an obstacle, the motor registers this and reacts with a STOP.
The motor also switches itself off if the roller shutter gets stuck in the guide rails due to frost when it is moving upwards. This prevents damage to the roller shutter.

The advantages of the motor at a glance:

professional specialist trade quality
particularly suitable for thermally insulated roller shutter boxes with confined installation conditions
fully automatic adjustment of the end points via ESK adjustment cable (Plug&Play). Prerequisite: Fixed shaft connectors and stoppers or angle end rails.
manual end point setting using the P1 button: With suspension springs and no fixed shaft connectors / stoppers / angle end rails
the end points can be set and adjusted using the ESK adjustment cable. if necessary, can be changed later without having to open the roller shutter box
obstacle detection when the roller shutter is lowered
frost detection when the roller shutter is raised
these drives can be operated without a cut-off relay or Central control can be connected in parallel
the maximum output power of the control device (timer or other) must be observed
super quiet gear, completely maintenance-free
thermal overload protection
fast 15 rotations per minute
easy installation
clear and comprehensive installation instructions
right and left installation possible
electromagnetic disc brake
5 year guarantee

Technical data:
Type:	3T45-30BE
Torque / Nm:	30
Tension power / kg:	60
Max. PVC roller shutter size / m²:	9
Max. Aluminum roller shutter size / m²:	7
Power / W:	200
Speed / rpm:	15
Operating voltage / V AC:	230
Limit switch capacity / max. revolutions:	22
Total engine length / mm:	660
Installation length / mm:	635
Cable length / m:	3
Protection class:	IP44

End position setting

Fully automatic setting of the end points (Plug&Play):
The upper and lower end positions are automatically approached, recognized and saved.

Manual setting of the end points:
The upper and lower end positions are approached and saved manually. The P1 button on the motor head is used for this.

Obstacle detection through suitable anti-lifting devices:

In order to correctly detect obstacles when the roller shutter is lowered, anti-lifting devices must be installed.

You can find the right anti-lifting devices here:

For correct obstacle detection, do not choose the pulling force of the motor too high:

PVC roller shutter size:	Alu roller shutter size:	Motor type:
up to 4.5 m²	up to 3 m²	3T45-10BE
from 4.5 m² to 6 m²	from 3 m² to 4.7 m²	3T45-20BE
from 6 m² to 9 m²	from 4.7 m² to 7 m²	3T45-30BE
from 9 m² to 11 m²	from 7 m² to 9.5 m²	3T45-40BE