Roller shutter motor 3T35-10B 10Nm SW40

SKU: 365
GTIN: 4260601761366
Category: 3T-Motors roller shutter motors
Manufacturers: 3T-Motors

With electronic limit and set button
10 Nm / 25 kg pulling force / Up to max. 5.25 m² PVC roller shutter size

46,90 €

incl. 19% VAT , plus

Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Description
Product Safety

Roller shutter motor 3T35-10B

With electronic limit and set button
10 Nm / 25 kg pulling force / SW40 (for 40 mm octagonal shafts)

The advantages of the motor at a glance:

professional retail quality
especially suitable for thermally insulated roller shutter boxes with tight installation conditions
electronic limit, simple setting of the end points via setting button on the motor head or via ESK setting aid cable
the end points can be set using the ESK setting aid cable and, if necessary, changed later without having to open the roller shutter box
these drives can be connected in parallel without a cut-off relay or centralised control
the maximum output power of the control unit (timer or other) must be observed
super quiet gearbox, completely maintenance-free
thermal overload protection
fast 17 rotations per minute
easy installation
complete and comprehensive assembly instructions
right-hand and left-hand installation equally possible
electromagnetic disc brake
5-year warranty

Technical data:
Type:	3T35-10B
Torque / Nm:	10
Tension force / kg:	25
Max. PVC roller shutter size / m²:	5.25
Max. aluminium roller shutter size / m²:	4.2
Power / W:	144
Speed / rpm:	17
Operating voltage / V AC:	230
Limit switch capacity / max. revolutions:	30
Total motor length / mm:	584
Installation length / mm:	568
Cable length / m:	3
Protection class:	IP44

Mounting instructions for mini motors SW40:

For mini tubular motors, we recommend the use of special mini suspension springs for motor operation, which only protrude approx. 1 mm into the roller shutter shaft.
This allows the shaft to rotate freely and prevents damage to the motor.

For steel shafts with a spanner width of 40 mm (SW40), only shafts with an external fold should be used.
Steel shafts with an internal fold will damage and destroy the motor.

The matching SW40 suspension springs for motor operation and SW40 roller shutter shafts can be found here:

You can find the ESK auxiliary adjustment cable here: