Roller shutter motor 3T35-13B 13Nm SW40

SKU: 366
GTIN: 4260601761373
Category: 3T-Motors roller shutter motors
Manufacturers: 3T-Motors

with electronic limit and set button
13 Nm / 40 kg pulling force / up to max. 7 m² PVC roller shutter size

49,90 €

incl. 19% VAT , plus

Goods ordered. 120 expected on 04.04.2025.

Roller shutter motor 3T35-13B

with electronic limit and set button
13 Nm / 40 kg pulling force / SW40 (for 40 mm octagonal shafts)

The advantages of the motor at a glance:

professional retail quality
especially suitable for thermally insulated roller shutter boxes with tight installation conditions
electronic limit, simple setting of the end points via setting button on the motor head or via ESK setting aid cable
the end points can be set using the ESK auxiliary setting cable and, if necessary, changed later without having to open the roller shutter box
these drives can be connected in parallel without a cut-off relay or centralised control
the maximum output power of the control unit (timer or other) must be observed
super quiet gearbox, completely maintenance-free
thermal overload protection
fast 14 rotations per minute
easy installation
complete and easy-to-understand assembly instructions
right and left installation equally possible
electromagnetic disc brake
5-year warranty

Technical data:
Type:	3T35-13B
Torque / Nm:	13
Tension force / kg:	40
Max. PVC roller shutter size / m²:	7
Max. aluminium roller shutter size / m²:	5.5
Power / W:	144
Speed / rpm:	14
Operating voltage / V AC:	230
Limit switch capacity / max. revolutions:	30
Total motor length / mm:	584
Installation length / mm:	568
Cable length / m:	3
Protection class:	IP44

Mounting instructions for mini motors SW40:

For mini tubular motors, we recommend the use of special mini suspension springs for motor operation, which only protrude approx. 1 mm into the roller shutter shaft.
This allows the shaft to rotate freely and prevents damage to the motor.

For steel shafts with a spanner width of 40 mm (SW40), only shafts with an external fold should be used.
Steel shafts with an internal fold will damage and destroy the motor.

The matching SW40 suspension springs for motor operation and SW40 roller shutter shafts can be found here:

You can find the ESK auxiliary adjustment cable here: