Prerequisite for obstacle detection: Fixed shaft connectors (Octoclick) and stopper or angle end rail.
Roller shutter motor 3T45-30BE
with electronic limit & obstacle detection
30 Nm / 60 kg pulling force / SW60 (for 60 mm octagonal shafts)
The electronic 3T-Motors tubular motor for roller shutter elements offers fully automatic adjustment (Plug&Play) of the end points via the ESK adjustment cable or manual end point adjustment via the P1 button.
If the roller shutter hits an obstacle, the motor registers this and reacts with a STOP.
The motor also switches itself off if the roller shutter gets stuck in the guide rails due to frost when it is moving upwards. This prevents damage to the roller shutter.
The advantages of the motor at a glance:
- professional specialist trade quality
- particularly suitable for thermally insulated roller shutter boxes with confined installation conditions
- fully automatic adjustment of the end points via ESK adjustment cable (Plug&Play). Prerequisite: Fixed shaft connectors and stoppers or angle end rails.
- manual end point setting using the P1 button: With suspension springs and no fixed shaft connectors / stoppers / angle end rails
- the end points can be set and adjusted using the ESK adjustment cable. if necessary, can be changed later without having to open the roller shutter box
- obstacle detection when the roller shutter is lowered
- frost detection when the roller shutter is raised
- these drives can be operated without a cut-off relay or Central control can be connected in parallel
the maximum output power of the control device (timer or other) must be observed
- super quiet gear, completely maintenance-free
- thermal overload protection
- fast 15 rotations per minute
- easy installation
- complete and easy-to-understand installation instructions
- right and left installation possible
- electromagnetic disc brake
- 5 year guarantee
| Technical data: |
| Type: |
3T45-30BE |
| Torque / Nm: |
30 |
| Tension power / kg: |
60 |
| Max. PVC roller shutter size / m²: |
9 |
| Max. Aluminum roller shutter size / m²: |
7 |
| Power / W: |
200 |
| Speed / rpm: |
15 |
| Operating voltage / V AC: |
230 |
| Limit switch capacity / max. revolutions: |
22 |
| Total engine length / mm: |
660 |
| Installation length / mm: |
635 |
| Cable length / m: |
3 |
| Protection class: |
IP44 |
Manual adjustment of the end positions:
The upper and lower end positions are manually approached and saved. To do this, the P1 button on the motor head is used. Alternatively, the manual end position adjustment can also be made using the adjustment cable (not included in the scope of delivery).
Here you can find the right adjustment cable:
Fully automatic adjustment of the end positions (Plug&Play):
The upper and lower end positions are automatically approached, detected, and saved.
For this function, the roller shutter must be equipped with lift-off protection and stoppers or an angle end rail.
Here you can find the right anti-lifting devices:
For correct obstacle detection, do not choose the pulling force of the motor too high:
| PVC roller shutter size: |
Alu roller shutter size: |
Motor type: |
| up to 4.5 m² |
up to 3 m² |
3T45-10BE |
| from 4.5 m² to 6 m² |
from 3 m² to 4.7 m² |
3T45-20BE |
| from 6 m² to 9 m² |
from 4.7 m² to 7 m² |
3T45-30BE |
| from 9 m² to 11 m² |
from 7 m² to 9.5 m² |
3T45-40BE |
What's included:
- 1 pc. motor 3T45-30BE
- 1 pc. adapter set SW60 (for 60 mm 8-sided shafts)
- 1 pc. universal bracket
- 1 pc. cover cap bracket
- 1 pc. adapter plate for cover cap bracket
- 2 pcs. wire end cap
- complete and easy-to-understand instruction manual
WEEE Reg. No.: DE 77028333
