Radio retrofit set for awning motors HST15 + AFE

Radio retrofit set for awning motors HST15 + AFE

SKU: 591
GTIN: 4260336110781
Category: Radio awning controls
Manufacturers: 3T-Motors

awning motors without radio can be retrofitted with this set

63,00 €

incl. 19% VAT , plus

Currently out of stock

Radio retrofit set for awning motors

AP radio receiver AFE and 3T radio handheld transmitter with timer 15-channel HST15

awning motors without radio can be retrofitted with this set
also suitable for blind, roller shutter and gate drives
with this set, you can quickly and easily realise a cost-effective radio control system including timer, whether as a retrofit or for a new installation

AP radio receiver AFE

compatible with all 3T radio transmitters
up to 20 radio transmitters/timers of the 3T radio series can be memorised
surface-mounted housing for wall mounting
suitable for indoor and outdoor use (water-protected, IP54)
control via radio with transmitter and additionally with double rocker switch
Do not use switches, these can cause damage to the system and the motors!
range approx. 35 m indoors, 200 m outdoors
switching power: 800 W

Technical data:
Type:	AFE
Operating voltage / V AC:	230 V / 50 Hz
Switching capacity:	For 230 V tubular motors up to 800 W
Standby consumption:	5 W
Protection class:	IP54
Operating temperature range:	-10°C to +50°C
Frequency / MHz:	433
Dimensions (LxWxH):	153x108x56 mm

Radio hand-held transmitter with timer 15-channel HST15

15-channel control
compatible with 3T radio tubular motors type R + RB and 3T radio receivers: MFE, UPE1, WEF1, WETF1, AFE
remote control of up to 15 individual motors or up to 15 motor groups
3 operating modes:
manual mode: operation without time function
automatic mode: operation with time function (one up and down time can be set per channel)
random mode: operation with time function and random time of +- 15 minutes
easy programming
LCD display
range approx. 30 m indoors, 200 m outdoors
incl. wall bracket, battery and instructions

Technical data:
Type:	HST15
Input voltage:	3 V
Frequency:	433.92 MHz ± 100 KHz
Transmitter power:	10 mW
Operating temperature range:	-10°C to +50°C
Battery type:	3 V / CR2430 (included)
Dimensions (LxWxH):	120x40x13 mm

What's included:

1 pc. AP radio receiver AFE
complete and easy-to-understand operating instructions for AFE
1 pc. radio hand-held transmitter with timer HST15
1 pc. battery 3 V / CR2430 for HST15
1 pc. wall bracket for HST15
2 pcs. wall plugs and screws for HST15
complete and easy-to-understand operating instructions for HST15

Product video:

WEEE-Reg. No.: DE 77028333

Manufacturer/EU Responsible person

3T-Components GmbH & Co. KG
Grete-Schickedanz-Straße 5
55545 Bad Kreuznach
Germany

E-mail: info@3t-components.de
Phone: 0671 887 673 0

Safety instructions for radio controls

Please read these important safety instructions before commissioning! Incorrect installation and operation can cause serious personal injury and damage to property. Failure to comply with this user information and all instructions and regulations contained herein will invalidate the warranty. If these instructions are not followed, the manufacturer or supplier shall not be liable for any personal injury or damage to property.

General safety instructions

Follow all instructions, as incorrect installation can lead to serious injury.

Make sure to change the batteries of the radio transmitter regularly. Only use the batteries recommended by the manufacturer. Dispose of used batteries in an environmentally friendly manner.

Improper use

Do not use old or damaged batteries. Dispose of defective batteries immediately in accordance with local regulations on battery disposal.

Proper use

Make sure that radio controls are suitable for use with tubular motors and comply with the technical specifications.
Persons must be instructed in the correct operation of the radio control system.
Check regularly that the radio control is working properly.

Disposal instructions

Separate collection of old appliances
Electrical and electronic appliances that have become waste are referred to as old appliances. Owners of old appliances must dispose of them separately from unsorted municipal waste. In particular, old appliances do not belong in household waste, but in special collection and return systems.

Possibilities for returning old appliances
Owners of old appliances from private households can hand them in at the collection points of the public waste disposal authorities or at the take-back centres set up by manufacturers or distributors in accordance with the ElektroG.

Meaning of the "crossed-out wheelie bin" symbol
The symbol of a crossed-out wheelie bin regularly displayed on electrical and electronic equipment indicates that the respective device must be collected separately from unsorted municipal waste at the end of its service life.

Battery instructions

Batteries can be returned free of charge to the point of sale after use.

The end user is legally obliged to return used batteries.

At the end of their service life, batteries and accumulators that are no longer usable must not be disposed of with household waste. This is indicated by the crossed-out wheelie bin symbol. The chemical symbols Hg (mercury), Cd (cadmium) or Pb (lead), which may appear below the symbol of the crossed-out wheelie bin, indicate the substances contained.