Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Flush-mounted wall transmitter with timer + integrated radio receiver 1-channel WETF1

Flush-mounted wall transmitter with timer + integrated radio receiver 1-channel WETF1

SKU: 891
GTIN: 4260336113362
HAN: WETF1
Category: 3T-Motors radio controls
Manufacturers: 3T-Motors

for the automation and switching of blind, roller shutter, awning and gate drives

42,90 €

incl. 19% VAT , plus

Available immediately
Delivery time: 0 Workdays (DE - int. shipments may differ)

Description
Product Safety

Flush-mounted wall receiver with timer WETF1

for the automation and switching of blind, shutter, awning and gate drives
with integrated 1-channel radio receiver

Features and functions:

compatible with all 3T radio transmitters
up to 20 radio transmitters/timers from the 3T radio range can be memorised
flush-mounted for installation in deep switch box (Ø 60 mm / depth: 66 mm)
control via radio with transmitter, timer function and operating buttons
3 operating modes:
manual mode: operation without timer function
automatic mode: operation with time function (weekly programme: one up and one down time can be set for each day of the week)
random mode: operation with time function and random time of +- 15 minutes
the device has a time logic (a short press of a button is enough to move the connected motor to the end position)

Technical data:
Type:	WETF1
Operating voltage / V AC:	230 V / 50 Hz
Switching capacity:	For 230 V tubular motors up to 300 W
Protection class:	IP20
Operating temperature range:	-10°C to +50°C
Frequency / MHz:	433.92
Dimensions (LxWxH):	80x80x48 mm

What's included:

1 pc. flush-mounted roller shutter switch WETF1
2 pcs. screws for mounting
complete and easy-to-understand operating instructions

Product video:

WEEE-Reg. No.: DE 77028333

Item information	Value
Shipping weight:	0,17 kg
Item weight:	0,13 kg

Manufacturer/EU Responsible person

3T-Components GmbH & Co. KG
Grete-Schickedanz-Straße 5
55545 Bad Kreuznach
Germany

E-mail: info@3t-components.de
Phone: 0671 887 673 0

Safety instructions for radio controls

Please read these important safety instructions before commissioning! Incorrect installation and operation can cause serious personal injury and damage to property. Failure to comply with this user information and all instructions and provisions contained therein will invalidate the warranty. If these instructions are not followed, the manufacturer or supplier shall not be liable for any personal injury or damage to property.

General safety instructions

Follow all instructions, as incorrect installation can lead to serious injury.

Make sure to change the batteries of the radio transmitter regularly. Only use the batteries recommended by the manufacturer. Dispose of used batteries in an environmentally friendly manner.

Improper use

Do not use old or damaged batteries. Dispose of defective batteries immediately in accordance with local regulations on battery disposal.

Proper use

Make sure that radio controls are suitable for use with tubular motors and comply with the technical specifications.
Persons must be instructed in the correct operation of the radio control system.
Check regularly that the radio control is working properly.

Disposal instructions

Separate collection of old appliances
Electrical and electronic appliances that have become waste are referred to as old appliances. Owners of old appliances must dispose of them separately from unsorted municipal waste. In particular, old appliances do not belong in household waste, but in special collection and return systems.

Possibilities for returning old appliances
Owners of old appliances from private households can hand them in at the collection points of the public waste disposal organisations or at the take-back points set up by manufacturers or distributors in accordance with the ElektroG.

Meaning of the "crossed-out wheelie bin" symbol
The symbol of a crossed-out wheelie bin regularly displayed on electrical and electronic equipment indicates that the respective device must be collected separately from unsorted municipal waste at the end of its service life.

Battery instructions

Batteries can be returned to the point of sale free of charge after use.

The end user is legally obliged to return used batteries.

At the end of their service life, batteries and accumulators that are no longer usable must not be disposed of with household waste. This is indicated by the crossed-out wheelie bin symbol. The chemical symbols Hg (mercury), Cd (cadmium) or Pb (lead), which may appear below the symbol of the crossed-out wheelie bin, indicate the substances contained.