Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Radio wall transmitter with timer WSTF1 1-channel

Radio wall transmitter with timer WSTF1 1-channel

SKU: 894
GTIN: 4260336113294
HAN: WSTF1
Category: 3T-Motors radio controls
Manufacturers: 3T-Motors

for the automation and switching of 3T radio tubular motors or 3T radio receivers

34,50 €

incl. 19% VAT , plus

Currently out of stock

Radio wall transmitter with timer 1-channel WSTF1

for the automation and switching of 3T radio tubular motors or 3T radio receivers

Features and functions:

1-channel control
compatible with 3T radio tubular motors type R + RB and 3T radio receivers: MFE, UPE1, WEF1, WETF1, AFE
suitable for motorised radio roller shutters, radio blinds or radio awnings
radio timer can be taught into one motor/receiver or several motors/receivers, creating a group
manual operation or automatic operation
weekly programme: one up and one down time can be programmed per weekday
holiday programme: Random shifting of the switching times by +-15 minutes
shutter and blind operating mode (jog mode possible, only when the direction button is pressed for longer than 2 seconds is the blind held open)
battery-operated: no additional wiring required
easy programming
LCD display
range of approx. 30 m indoors, 200 m outdoors
incl. wall bracket, battery and instructions

Technical data:
Type:	WSTF1
Input voltage:	3 V
Frequency:	433.92 MHz ± 100 KHz
Transmitter power:	10 mW
Operating temperature range:	-10°C to +50°C
Battery type:	3 V / CR2430 (included)
Dimensions (LxWxH):	80x80x12 mm

What's included:

1 pc. radio wall transmitter with timer WSTF1
1 pc. battery 3 V / CR2430
1 pc. wall bracket
2 pcs. dowels and screws
complete and easy-to-understand operating instructions

Product video:

WEEE-Reg. No.: DE 77028333

Item information	Value
Shipping weight:	0,11 kg
Item weight:	0,06 kg

Manufacturer/EU Responsible person

3T-Components GmbH & Co. KG
Grete-Schickedanz-Straße 5
55545 Bad Kreuznach
Germany

E-mail: info@3t-components.de
Phone: 0671 887 673 0

Safety instructions for radio controls

Please read these important safety instructions before commissioning! Incorrect installation and operation can cause serious personal injury and damage to property. Failure to comply with this user information and all instructions and regulations contained herein will invalidate the warranty. If these instructions are not followed, the manufacturer or supplier shall not be liable for any personal injury or damage to property.

General safety instructions

Follow all instructions, as incorrect installation can lead to serious injury.

Make sure to change the batteries of the radio transmitter regularly. Only use the batteries recommended by the manufacturer. Dispose of used batteries in an environmentally friendly manner.

Improper use

Do not use old or damaged batteries. Dispose of defective batteries immediately in accordance with local regulations on battery disposal.

Proper use

Make sure that radio controls are suitable for use with tubular motors and comply with the technical specifications.
Persons must be instructed in the correct operation of the radio control system.
Check regularly that the radio control is working properly.

Disposal instructions

Separate collection of old appliances
Electrical and electronic appliances that have become waste are referred to as old appliances. Owners of old appliances must dispose of them separately from unsorted municipal waste. In particular, old appliances do not belong in household waste, but in special collection and return systems.

Possibilities for returning old appliances
Owners of old appliances from private households can hand them in at the collection points of the public waste disposal authorities or at the take-back centres set up by manufacturers or distributors in accordance with the ElektroG.

Meaning of the "crossed-out wheelie bin" symbol
The symbol of a crossed-out wheelie bin regularly displayed on electrical and electronic equipment indicates that the respective device must be collected separately from unsorted municipal waste at the end of its service life.

Battery instructions

Batteries can be returned to the point of sale free of charge after use.

The end user is legally obliged to return used batteries.

At the end of their service life, batteries and accumulators that are no longer usable must not be disposed of with household waste. This is indicated by the crossed-out wheelie bin symbol. The chemical symbols Hg (mercury), Cd (cadmium) or Pb (lead), which may appear below the symbol of the crossed-out wheelie bin, indicate the substances contained.