3T radio retrofit set for awning motors AFE/LED + HSFL

3T radio retrofit set for awning motors AFE/LED + HSFL

SKU: 567
GTIN: 4260601761304
Category: 3T-Motors radio controls
Manufacturers: 3T-Motors

Awning motors without radio can be retrofitted with this set - with 12 V LED connection and light control

54,40 €

incl. 19% VAT , plus

Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Description
Product safety

3T Radio Retrofit Kit for Awning Motors

AP Radio Receiver AFE/LED and 3T Radio Hand Transmitter 1-Channel HSFL

Awnings without radio control can be retrofitted with this kit
Also suitable for shutter, roller shutter, and gate operators
Connection for 12 V LED lighting: 12V DC, 2 A, 24 W
Light control via hand transmitter HSFL
With this kit, you can quickly and easily implement a cost-effective radio control with a 12 V LED connection, whether for retrofit or new installation

AP Radio Receiver AFE/LED

Surface-mounted radio receiver for controlling shutter, roller shutter, awning, and gate operators
Compatible with all 3T radio transmitters
Connection for 12 V LED lighting / 12V DC, 2 A, 24 W
LED light control via 3T radio hand transmitter HSFL
Can store up to 20 radio transmitters/timers from the 3T radio series
Range: approx. 35 m indoors, 200 m outdoors
Includes wall mount, instructions, dowels, and screws for installation

Technical Data:
Type:	AFE/LED
Operating Voltage:	240 V / 50 Hz
Switching Power:	For 230 V tubular motors up to 600 W
Standby Consumption / W:	< 0.5
Protection Class:	IP55
Operating Temperature Range:	-10 °C to +50 °C
Frequency:	433.92 MHz
Range:	Approx. 35 meters indoors / 200 meters outdoors
Dimensions (LxWxH):	133x80x45 mm
Channels:	Can store up to 20 transmitter channels

3T Radio Hand Transmitter 1-Channel HSFL

For controlling 3T radio roller shutter motors or 3T radio receivers with light control
Light control in conjunction with AP radio receiver AFE/LED
1-channel control
Transmitter can be paired with one motor/receiver or multiple motors/receivers to create a group.
Range approx. 30 m indoors, 200 m outdoors
Includes magnetic wall mount, instructions, screws, dowels for mounting, and battery

Technical Data:
Type:	HSFL
Input Voltage:	3 V
Frequency:	433.92 MHz ± 100 KHz
Transmitter Power:	10 mW
Operating Temperature Range:	-10 °C to +50 °C
Range:	Approx. 30 meters indoors / 200 meters outdoors
Battery Type:	3 V / CR2450

What's included:

1 x AP radio receiver AFE/LED
1 x Wall mount for AFE/LED
2 x Dowels and screws for AFE/LED
Comprehensive and easy-to-understand manual for AFE/LED
1 x 3T radio hand transmitter HSFL
1 x 3 V / CR2450 battery for HSFL
1 x Magnetic wall mount for HSFL
2 x Dowels and screws for HSFL
Comprehensive and easy-to-understand manual for HSFL

Product Video:

WEEE Reg. No.: DE 77028333

Manufacturer/EU Responsible person

3T-Components GmbH & Co. KG
Grete-Schickedanz-Straße 5
55545 Bad Kreuznach
Germany

E-mail: info@3t-components.de
Phone: 0671 887 673 0

Safety instructions for radio controls

Please read these important safety instructions before commissioning! Incorrect installation and operation can cause serious personal injury and damage to property. Failure to comply with this user information and all instructions and regulations contained herein will invalidate the warranty. If these instructions are not followed, the manufacturer or supplier shall not be liable for any personal injury or damage to property.

General safety instructions

Follow all instructions, as incorrect installation can lead to serious injury.

Make sure to change the batteries of the radio transmitter regularly. Only use the batteries recommended by the manufacturer. Dispose of used batteries in an environmentally friendly manner.

Improper use

Do not use old or damaged batteries. Dispose of defective batteries immediately in accordance with local regulations on battery disposal.

Proper use

Make sure that radio controls are suitable for use with tubular motors and comply with the technical specifications.
Persons must be instructed in the correct operation of the radio control system.
Check regularly that the radio control is working properly.

Disposal instructions

Separate collection of old appliances
Electrical and electronic appliances that have become waste are referred to as old appliances. Owners of old appliances must dispose of them separately from unsorted municipal waste. In particular, old appliances do not belong in household waste, but in special collection and return systems.

Possibilities for returning old appliances
Owners of old appliances from private households can hand them in at the collection points of the public waste disposal authorities or at the take-back centres set up by manufacturers or distributors in accordance with the ElektroG.

Meaning of the "crossed-out wheelie bin" symbol
The symbol of a crossed-out wheelie bin regularly shown on electrical and electronic equipment indicates that the respective device must be collected separately from unsorted municipal waste at the end of its service life.

Battery instructions

Batteries can be returned free of charge to the point of sale after use.

The end user is legally obliged to return used batteries.

At the end of their service life, batteries and accumulators that are no longer usable must not be disposed of with household waste. This is indicated by the crossed-out wheelie bin symbol. The chemical symbols Hg (mercury), Cd (cadmium) or Pb (lead), which may appear below the symbol of the crossed-out wheelie bin, indicate the substances contained.