Radio shutter motors with mechanical limit bidirectional
Bidirectional means that communication works in both directions. In the case of roller shutter motors, this means
that they not only receive commands, but also provide feedback. So when you open or close a roller shutter, you
immediately receive information on your smartphone about what has actually happened. This means you always
know whether the roller shutter is open, closed or partially open. You can also control your roller shutters via smartphone.
Our bidirectional motors from the RX and RBX series are only compatible with:
- the bidirectional transmitters from
(X series and Z series) or ...
- the Connector app in conjunction with the Wifi-Bridge / Mini-Bridge from
or ...
- the Everhome app in conjunction with the Cloudbox from everHome (further information can be found on the everHome website)
Wireless roller shutter motors with mechanical limit switches - bidirectional (RX):
The end points can be set precisely by mechanically adjusting the end positions using the setting pin. The standard motors SW60 are available up to 50Nm, our mini motors SW40 up to 13Nm, this corresponds to a pulling force of 100kg (SW60) or 40kg (SW40). To select the correct roller shutter motor, please open the roller shutter box and measure the outer diameter (width across flats) of your roller shutter shaft.
SKU: 632
Torque: 10 Nm
Width across flats: SW60
Tension force: 25 kg
SKU: 633
Torque: 20 Nm
Width across flats: SW60
Tension force: 40 kg
SKU: 634
Torque: 30 Nm
Width across flats: SW60
Tension force: 60 kg
SKU: 635
Torque: 40 Nm
Width across flats: SW60
Tension force: 80 kg
SKU: 630
Torque: 10 Nm
Width across flats: SW40
Tension force: 25 kg
SKU: 631
Torque: 13 Nm
Width across flats: SW40
Tension force: 40 kg