Time switch 3TimeTronic
For switching roller shutter and blind drives
Including DIN intermediate frame for Busch-Jaeger switch ranges:
- Reflex SI
- Solo, Axcent, Future linear
- Impulse
- Alpha Nea, Alpha Exclusive
Features and functions:
- Flush-mounted for installation in deep switch box (Ø 60mm / depth: 66mm)
- Daily programme / weekly programme
- Holiday programme
- 8 hours power reserve
- Switchable between shutter and blind operating mode (jog mode possible)
- Colour: ultra white
Operating modes:
-
Manual operation:
Manual control via up/down buttons
-
Automatic mode:
Daily programme: A common switching time can be set for the entire week
Weekly programme: The switching times can be set individually for each day of the week.
Working week + Sat and Sun: A common switching time can be set for Mon - Fri / Individual switching times for Sat + Sun.
-
Holiday programme:
Random generator shifts the switching times by ±15 minutes.
| Technical data: |
| Nominal voltage: |
230 V / 50 Hz |
| Switching capacity: |
250 V / 50 Hz, 5 A |
| Temperature range: |
-20°C to +50°C |
| Switching time: |
3 min |
| Switching delay: |
At least 0.5 sec |
| Power reserve: |
8 hours |
| Connection: |
0.5 ... 2.5 mm² solid |
| Dimensions (LxWxH): |
80x80x48 mm (with frame) |
| Protection class: |
IP20 |
| Protection class: |
II |
| Conformity: |
CE |
| Installation: |
In deep switch box (Ø 60 mm / depth: 66 mm) |
What's included:
- 1 pc. 3TimeTronic timer, ultra white
- 1 pc. DIN intermediate frame of your choice
- Comprehensive and easy-to-understand operating instructions
- 2-year guarantee from date of delivery
Manufacturer/EU Responsible person
3T-Components GmbH & Co. KG
Grete-Schickedanz-Straße 5
55545 Bad Kreuznach
Germany
E-mail: info@3t-components.de
Phone: 0671 887 673 0
Safety instructions for switching devices
Please read these important safety instructions before commissioning!
Incorrect installation and operation can cause serious personal injury and damage to property.
Failure to observe this user information, including all instructions and provisions, will invalidate the warranty.
If these instructions are not followed, the manufacturer or supplier shall not be liable for any personal injury or damage to property.
General safety instructions
Follow all instructions, as incorrect installation can lead to serious injury.
- Danger to life due to electric shock when working on electrical installations
.
- The electrical connection, installation and commissioning may only be carried out by qualified specialist personnel.
Assembly and connection must always be carried out in a de-energised state to avoid the risk of electric shock.Only use switching devices that are equipped with a minimum contact opening of 3 mm and have the up and down directions interlocked against each other.
- Installations in damp rooms may only be carried out in accordance with the applicable regulations (e.g. VDE 0100, Parts 701 and 702).
Store the switching device in a dry and safe place when not in use.Devices may only be serviced or repaired by qualified personnel. Unauthorised repairs can lead to damage and safety risks.In the event of replacement, ensure that only original or equivalent spare parts are used.
- Keep the instructions for future reference
.
Inappropriate use
- Do not use damaged devices. If the switching device is defective, it must no longer be used and must be replaced immediately.
Keep the devices away from children and ensure that they are only operated by authorised persons.
- Children must not play with the appliance.
If the appliance is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.Make sure that no moisture or other contaminants enter the devices to avoid short circuits and malfunctions.
Proper use
- Make sure that switching devices are suitable for use with tubular motors and comply with the technical specifications.
Timers must be programmed correctly to safely control the movement of shutters and minimise potential injury hazards
- Persons must be instructed with the correct operation.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Check regularly that the switching device is working properly.
Disposal instructions
Separate collection of old appliances
Electrical and electronic appliances that have become waste are referred to as old appliances. Owners of old appliances must dispose of them separately from unsorted municipal waste. In particular, old appliances do not belong in household waste, but in special collection and return systems.
Possibilities for returning old appliances
Owners of old appliances from private households can hand them in at the collection points of the public waste disposal authorities or at the take-back centres set up by manufacturers or distributors in accordance with the ElektroG.
Meaning of the "crossed-out wheelie bin" symbol
The crossed-out wheelie bin symbol regularly displayed on electrical and electronic appliances indicates that the appliance in question must be collected separately from unsorted municipal waste at the end of its service life.
