OCTOCLICK anti-lift device 2.5-link

SKU: 834
GTIN: 4260336110583
Category: Roller shutter mounting accessories
Manufacturers: 3T-Motors

Burglar-resistant, as the sliding up of a closed, motorised roller shutter is prevented

6,90 €

incl. 19% VAT , plus

Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Description
Product safety

OCTOCLICK anti-lift device 2.5-link

Suitable for roller shutter shaft SW50 & SW60

The advantages of Anti-lifting device at a glance:

Burglar-proof, as it prevents a closed, motorised roller shutter from being pushed up
For roller shutter motors with electronic or mechanical limit
For roller shutter motors with obstacle detection or automatic end position detection
For octagonal shafts 50 mm and 60 mm
For roller shutter curtains thickness 8 or 14 mm (mounting profile can be rotated )
The maximum pulling power is 7 kg of armor weight per anti-lift device

The links The anti-lifting device is made of glass fibre reinforced polyamide. They are connected to each other using a hinge principle and cannot disengage when the roller shutter is being rolled up and down.

For quick and reliable fastening to the shaft, a new type of clip fastening is used. which does not require any tools: It is attached using 2 special metal clips which fit into corresponding square holes (5 x 8 mm) on the 50 or 60 octagonal shaft.

Since the hole spacing of the square holes varies depending on the shaft manufacturer, 3 different grids with spacings of 58, 65 and 73 mm are provided in the first link of the anti-lift device to adapt the anti-lift device to all common octagonal shafts.

In addition, it is still possible to either screw or rivet the anti-lift device onto the octagonal shaft. For this purpose, 4 screw holes with a diameter of 4.5 mm are provided in the Distance of 60, 68 and 76 mm on the first link to fix the anti-lift device on pre-drilled or undrilled shafts. Important: Please note that the screws do not touch the motor damage.

The connection to the tank is made via a side-removable and reversible Mounting profile that has 2 sides and can therefore be used equally for 8 or 14 mm roller shutter slats.

Determining the correct number of links:

Type of roller shutter box	Depth of roller shutter box td>	Type OctoClick
Aluminum stem box	180 - 205 mm	2-part
New construction kit; Lintel box	180 - 210 mm	2-part
New construction box, lintel box	210 - 240 mm	2.5-link

Number of anti-lifting devices per roller shutter:

Roller shutter width	Minimum number
up to 140 cm	2 OctoClick
141 - 235 cm	3 OctoClick
236 - 333 cm	4 OctoClick

Installation of anti-lift device:

When installing the shaft in the lintel box, attach the links of the anti-lifting devices - without the mounting profile - to the shaft
Push the loose mounting profiles onto the first bar of the roller shutter curtain
Insert the roller shutter into the guide rails
Connect the roller shutter to the shaft by placing the mounting profiles on the links the anti-lift devices

Data sheet