Wireless Solar-Wind-Sun-Sensor SWS

SKU: 818
GTIN: 4260601766903
Category: Radio solar weather sensor
Manufacturers: 3T-Motors

For weather-dependent control of 3T radio awning motors or 3T AP radio receivers AFE

90,90 €

incl. 19% VAT , plus

Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Description
Product safety

3T Solar-Wind-Sun-Sensor SWS

For weather-dependent control of 3T radio awning motors or 3T AP radio receivers AFE

Features and functions:

Completely wireless, as it is self-powered by means of an integrated photovoltaic module
Lithium battery for energy storage, optional charging via USB micro-C connection
Taught-in via already programmed transmitter of the radio awning motor or radio awning control
Sensor can be programmed for several radio motors / radio receivers
3 mounting positions thanks to 180° adjustable wall bracket (incl. plugs and screws)
High wind sensitivity due to spherical wind wheel
Individually programmable "wind threshold" from 1 - 180 km/h:
If the set wind speed is exceeded, the drive retracts the awning
Individually programmable "sun threshold" from 1 - 100 kilolux:
If the set sun threshold is exceeded for longer than 5 minutes, the drive extends the awning.
If the value falls below the set sun threshold for longer than 15 minutes, the drive retracts the awning.
The individual sensors can be deactivated and activated by setting the values on the device.
Bi-directional and uni-directional mode for different radio receivers

Technical data:
Size (WxHxD):	215 x 90 x 75 mm
Operating temperature range:	-20 °C to +60 °C
Operating voltage V DC:	3.7 V
Protection class:	IP 55 (water-protected)
Radio frequency:	433.05 - 434.79 MHz
Range:	approx. 100 m in outdoor areas

Scope of delivery:

1 piece 3T wireless solar wind-sun sensor SWS
2 screws and dowels for mounting
Comprehensive and easy-to-understand operating and installation instructions

Product video:

WEEE-Reg. No.: DE 77028333

Manufacturer/EU Responsible person

3T-Components GmbH & Co. KG
Grete-Schickedanz-Straße 5
55545 Bad Kreuznach
Germany

E-mail: info@3t-components.de
Phone: 0671 887 673 0

Safety instructions for radio controls

Please read these important safety instructions before commissioning! Incorrect installation and operation can cause serious personal injury and damage to property. Failure to comply with this user information and all instructions and regulations contained herein will invalidate the warranty. If these instructions are not followed, the manufacturer or supplier shall not be liable for any personal injury or damage to property.

General safety instructions

Follow all instructions, as incorrect installation can lead to serious injury.

Make sure to change the batteries of the radio transmitter regularly. Only use the batteries recommended by the manufacturer. Dispose of used batteries in an environmentally friendly manner.

Improper use

Do not use old or damaged batteries. Dispose of defective batteries immediately in accordance with local regulations on battery disposal.

Proper use

Make sure that radio controls are suitable for use with tubular motors and comply with the technical specifications.
Persons must be instructed in the correct operation of the radio control system.
Check regularly that the radio control is working properly.

Disposal instructions

Separate collection of old appliances
Electrical and electronic appliances that have become waste are referred to as old appliances. Owners of old appliances must dispose of them separately from unsorted municipal waste. In particular, old appliances do not belong in household waste, but in special collection and return systems.

Possibilities for returning old appliances
Owners of old appliances from private households can hand them in at the collection points of the public waste disposal authorities or at the take-back centres set up by manufacturers or distributors in accordance with the ElektroG.

Meaning of the "crossed-out wheelie bin" symbol
The symbol of a crossed-out wheelie bin regularly displayed on electrical and electronic equipment indicates that the respective device must be collected separately from unsorted municipal waste at the end of its service life.

Battery instructions

Batteries can be returned free of charge to the point of sale after use.

The end user is legally obliged to return used batteries.

At the end of their service life, batteries and accumulators that are no longer usable must not be disposed of with household waste. This is indicated by the crossed-out wheelie bin symbol. The chemical symbols Hg (mercury), Cd (cadmium) or Pb (lead), which may appear below the symbol of the crossed-out wheelie bin, indicate the substances contained.